The advantages and maintenance of three-foot centrifuge
　　Centrifuges are a type of centrifugal equipment used to separate substances and are used in a wide variety of industries. Widely used in the market today are triple-legged centrifuges, whose range of action is expanding. Different devices have their own advantages and disadvantages, and each has its own unique advantages in filter and sedimentation type triple-legged centrifuges.
　　The three-foot centrifuge is a gap-operated centrifuge with a fixed filter bed. The main advantage of the three-foot centrifuge is its adaptability to materials. Fine and difficult to separate materials can be filtered by installing filter cloths, and materials whose filter cloths cannot be regenerated can be removed for washing. Its filtration and washing time can be controlled arbitrarily, so dry filter cake and sufficient washing can be obtained. And there is almost no damage to the particles of the used three-foot centrifuge; the filtrate obtained is transparent. In addition, the machine runs smoothly; the manual discharge tripod centrifuge has a simple structure and is inexpensive. The disadvantage of three-foot centrifuge is intermittent operation, each cycle is long, the production capacity is small, generally only suitable for small batch production. At the same time, manual unloading is labor-intensive.
　　In addition, the maintenance of the filter is essential! If necessary, you can refer to my advice to everyone to operate. The maintenance of the three-foot centrifuge is as follows:
　　a. For centrifuges that are cut off for maintenance, special attention should be paid to the direction of rotation of the centrifuge when accepting it (generally looking down clockwise).
　　b. When the centrifuge is running, it is strictly forbidden to enter the drum to avoid injury.
　　c. After the work is finished, the equipment should be cleaned up in time to keep the equipment clean and the surrounding environment clean.
　　d. Once the tripod centrifuge structure diagram shows abnormal operation of the equipment, stop immediately for inspection.