Problems to be aware of when supplying power to bagged centrifuges
　　Hanging bag centrifuges usually operate at extremely high speeds. When the centrifugal force on the rotor exceeds the tensile strength of the rotor data or if there is an internal defect in the rotor data, the rotor may explode, damaging the equipment and endangering the personal safety of the operator.
　　For this reason, each rotor of a hanging bag centrifuge has a promised high operating speed. The automatic rotor identification and overspeed maintenance feature identifies the rotor by scanning a bar code on the rotor surface, eliminating the possibility of the operator entering incorrect data or losing control of the centrifuge causing the rotor to run too fast.
　　When we use hanging bag centrifuges, sometimes problems arise due to power problems. Today the centrifuge manufacturer will give you more details about power supply problems with hanging bag centrifuges.
　　Power outages are one of the causes of poor refrigerator start-up and cooling, the same problem as motors not turning, so power supply and fuses should be checked separately.
　　The weight of the centrifuge tube of the hanging bag centrifuge is unbalanced and placed incorrectly; there is a foreign object in the rotor hole, which makes the load unbalanced; the fixing nut at the upper end of the rotor is loose and the rotor is rubbed or twisted; noise is generated when the motor rotor is not in the center of the magnetic field; damage to the rotor itself can cause severe vibration and abnormal sound.
　　Poor ventilation function, such as the instrument is installed in direct sunlight or poorly ventilated area, poor radiator function, or the radiator is covered with dust, will also affect the cooling function.
　　If the voltage is too low, the refrigerator will not start because of equipment problems. If the voltage is too low, the grid voltage may be too low. Too much wiring in the distribution panel; too long power cord (ideal length is 3 meters), etc. Insufficient power line capacity will not only lower the voltage, but also cause accidents. When the power supply voltage drops to 180-190VJ, the refrigerator can not start, affecting the cooling effect.
　　Most of the above reasons are caused by inaccurate operation. After finding out the reason, accurate operation can eliminate the abnormal phenomenon. During the operation, if abnormal phenomenon occurs, should immediately stop, do not force the operation, so as not to cause losses.
　　All of the above is about the power supply of hanging bag centrifuge, hope it will help us. For more information, please pay attention to the hanging bag centrifuge manufacturer.